Valve-Tronic Plus™


Valve-Tronic Plus™ - Electronic Flow Controller

The Valve-Tronic Plus™ is designed for use in highly demanding industrial applications that require accurate flow control and measurement. It can function as a stand-alone controller for basic applications or become an integral part of a process control system for automatic flow control.

FEATURES

  • Large LCD display provides vital information such as actual flow rate, totalized flow, valve position, alarms, and diagnostic messages
  • Simple and intuitive programming menus
  • Field programmable engineering units
  • Waukee's new magnetic sensor technology immune to problems related with dirty oil
  • Configurable to control based on rate of flow or valve position for applications where the Process Variable (PV) is Dew-point, Carbon Potential, etc.
  • Standard Modbus TCP for easy integration with control systems
  • Manual actuation of value possible
  • Easy to install
  • Ideal for customers who need to control and data log flow rates for compliance to NADCAP, AMS2750D, or CQI 9
  • Field calibration for null and span
  • Advanced polynomial calibration for high accuracy over the entire range of the meter
  • Built-in Web Server with remote access to device
  • Full PID setpoint control
  • Calibration in state-of-art ISO/IEC 17025:2005 accredited laboratory


DOWNLOAD BROCHURE
Valve-Tronic Plus™ - Electronic Flow Controller
  • Annealing
  • Carburizing
  • Gas Blending
  • Neutral Hardening
  • Nitriding
  • Sintering
  • All gas types and mixtures
  • Liquids including: water, alcohol, and methanol


* If you are unsure of the gas or liquid compatibility of your application, please contact your Waukee representative.
POWER REQUIREMENTS:500mA @ 24 VDC ±10%
DIGITAL INPUT:1 Input, 24 VDC (programmable)
DIGITAL OUTPUT:3 Outputs, 24 VDC, 1.0A max (programmable)
SETPOINT INPUT SIGNAL:Isolated 4-20mA
FLOW/TOTALIZED OUTPUT SIGNAL: Isolated 4-20mA
SCALE: Air (70°F; 14.7 PSIA / 21°C; 1 bar)
Model S: 4-100 CFH (0-3 m3/hr)
Model M: 10-1500 CFH (0-42 m3/hr)
Model L: 150-18,000 CFH (4-510 m3/hr)

Liquid
Model SF: 0.2-25 GPH (0.75-95 l/hr)
TURNDOWN RATIO:Model S: 10:1
Model M: 12.5:1
Model L: 15:1
ACCURACY:VDE/VDI 3513 sh.2, qG=50%
Model S/SF: 5%
Model M: 4%
Model L: 3%
MAX OPERATING TEMPERATURE:Ambient: 140°F (60°C)
Media: 200°F (93°C)
MAX PRESSURE:100 PSIG (7 bar)
MAX OPERATING PRESSURE: Model S/SF:90 PSIG (6 bar)
Model M: 75, 90 PSIG (5, 6 bar)
Model L: 5, 10, 30, 75 PSIG (⅓, 0.7, 2, 5 bar)
PRESSURE DROP≤ 2” W.C. (5 mbar)
RECOMMENDED INLET PRESSURE:≥ 0.5 PSI; 14” W.C. (35 mbar)