Gas Air Mixors™


GAS AIR MIXORS™

The Waukee Mixor™ is a precision compressor-carburetor device which accurately mixes gas and air in any selected ratio, and compresses it for use with endothermic cracking, or exothermic cracking generators, or as a source of pre-mixed gas and air for torch brazing, flame heat treating, or sort metal melting.

FEATURES:

Automatic Bypass Regulator
The Compressor includes built-in pressure regulator which automatically bypasses compressor output back to the compressor inlet when output is reduced or completely shut off.
Standard Motor
Nobody likes special motors when there is trouble, due to the delays and shutdowns while motor repairs are being made, or a new motor purchased. That's why the Waukee Mixor was engineered with a standard 1750 RPM motor, driving the compressor through a standard "V" belt. Motor adjusting base is provided with take up for proper belt tension.

Air Filter
The air inlet of the Waukee Mixor is protected by a filter which cleans the air of dust, so that it doesn't get into the carburetor and gum up the works.

Critical Cracking Control:
For critical cracking applications such as Endothermic cracking of natural gas, propane or butane the unit is available with an enriching flow meter so that extremely small increments of gas addition can be made with high accuracy of flow rates.

Flow-Meters
UPC manufactures a complete line of precision Flow-Meters for use with Waukee Gas Mixors™, and also for measuring all industrial gases in processing.