Flo-Tronic Plus


Flo-Tronic Plus™ - Flow Meter

The Flo-Tronic Plus™™ is based on a standard Flo-Meter™™ with or without a manual flow control valve. It provides visual flow rate indication as required by NFPA as well as an analog output in direct relation to the flow rate.

The Waukee new magnetic flow sensing technology is immune to problems associated with dirty oil. Ideal for customers who need to data log flow rates for compliance to NADCAP, AMS 2750D, or CQI 9.


DOWNLOAD BROCHURE

FEATURES

  • Meets NFPA requirements for visual indication of flow
  • Isolated 4-20mA current loop output
  • Over current and reverse polarity protection
  • Calibrated in our ISO/IEC17025-2005 Calibration Lab and traceable to NIST (National Institute of Standards and Technology)
  • Multipoint calibration
  • Simple Installation
  • Modbus/TCP communications
  • 1 Programmable relay out
  • Easily connects to any PLC or controller with differential or single ended analog inputs
  • Retrofittable to most existing Waukee Flo-Meters
  • Annealing
  • Carburizing
  • Gas Blending
  • Neutral Hardening
  • Nitriding
  • Sintering
  • All gas types and mixtures
  • Liquids including: water, alcohol, and methanol


* If you are unsure of the gas or liquid compatibility of your application, please contact your Waukee representative.
POWER REQUIREMENTS:75mA24VDC (±10%)
ISOLATED OUTPUT:Field selectable
0-20mA, 4-20mA,
0-10VDC, 2-10VDC
SCALE: Air (70°F; 14.7 PSIA / 21°C; 1 bar)
Model S: 4-100 CFH (0-3 m3/hr)
Model M: 10-1500 CFH (0-42 m3/hr)
Model L: 150-40,000 CFH (4-1133 m3/hr)

Liquid
Model SF: 0.2-25 GPH (0.75-95 l/hr)

TURNDOWN RATIO:Model S: 10:1
Model M: 12.5:1
Model L: 15:1
ACCURACY:VDE/VDI 3513 sh.2, qG=50%
Model S/SF: 5%
Model M: 4%
Model L: 3%
MAX OPERATING TEMPERATURE:Ambient: 150°F (65°C)
Media: 200°F (93°C)
MAX PRESSURE:100 PSIG (7 bar)
MAX OPERATING PRESSURE: Model S/SF:90 PSIG (6 bar)
Model M: 75, 90 PSIG (5, 6 bar)
Model L: 5, 10, 30, 75 PSIG (⅓, 0.7, 2, 5 bar)
PRESSURE DROP≤ 2” W.C. (5 mbar)
ALARM RELAYSPST 0.5A@30VDC